Online Catalogue | Instruments | Engine Instruments | VDO Instruments
Ref: CHTP001
Quantity:
VDO CHT gauge and 12mm ring sender complete with extension leads.Colour band marking specifically for Jabiru J2200 and J3300 enginesThe cold junction of the CHT sender should be stable at around 22 deg C, so for every degree higher at the cold junction the gauge will display 1 degree lower and vice versa.
Ref: CHT001
VDO CHT Gauge & Sender comes with 12mm ring for Jabiru spark plug fitmentThe cold junction of the CHT sender should be stable at around 22 deg C, so for every degree higher at the cold junction the gauge will display 1 degree lower and vice versa.
Ref: KSPW0017
VDO CHT/ Oil Temperature Gauge (Electric)Suitable for Rotax oil temperature or CHT on the 912Sometimes used in place of the OTGP001 on the Jabiru for oil temperatureUsually dual scaled in F & C or single scale in FSender not included 12 Volt
Ref: KSPW0016
VDO Coolant Temperature GaugeElectrical operation complete with probe suitable for Rotax 912 and 582.
Ref: KSPW0008
VDO EGT Gauge 250 to 1650 deg F.Sender not included
Ref: FUEL001
52mm, 12VDC, lever type
Ref: KSPW0022
Standard 12 to 24 volt recording hour meter
Ref: KSPW0019
VDO Oil pressure gauge (electrical) 0-150 psi as normally fitted to Rotax 912. Usually dual scaled as picture or single scale in PSI.Sender not included
Ref: OPG002
Sender not included
Ref: OPGP001
VDO oil pressure gauge in HCPA with painted in colour band markings for the correct range for Jabiru enginesSender not included but already fitted to new Jabiru engines
Ref: OPG001
VDO Oil Pressure Gauge 5 BarSender not included
Ref: OTGP001
VDO oil temperature gauge with painted in colour band markings for the correct range for Jabiru enginesSender not included, but fitted to new Jabiru engines when supplied
Ref: OTG001
VDO Oil Temp Gauge 150 Degree CSender not included
Ref: KSPW0028
VDO RPM gauge, engine choice selectable by dip switches on the rear casing 52mm
Ref: TACMTR01
VDO Tachometer 0-4000 rpm, 80mm, with Hour Counter
Ref: TACMTR01-85
VDO Tachometer 0-4000 rpm, 85mm, with Hour Counter
Ref: VOLTP001
VDO Voltmeter gauge as normally supplied with Jabiru kits, suitable for other applications. 8 to 16 volts. Green arc from 10.5 to 15 volts
Ref: VOLT001
People who bought this item also bought:
Ref: KSPW0014
VDO water temperature gauge as fitted by Rans on the S6 with the Rotax 582 engine.Capillery action, suits other 582 instalations
