Jabiru J2200 Engine Bearing Set

Ref: 2200BRGSET

Quantity:

Price: £245.01 (£294.01 Including VAT at 20%)

Save yourself 15% and buy this set. Comprsing of a full set of main end, rod end and thrust bearings for J2200 series engines.

Jabiru 3300 Engine Bearing Set

Ref: 3300BRGSET

Quantity:

Price: £327.12 (£392.54 Including VAT at 20%)

Save yourself 15% and buy this set. Comprising of a full set of main end, rod end and thrust bearings for J3300 series engine.

Plate Prop Mount 2.2 (use p/n 4A542AOD)

Ref: 4081223

Quantity:

Jabiru Engine Part

Barrel Stud Long

Ref: 4291044

Quantity:

Price: £18.17 (£21.80 Including VAT at 20%)

Latest design for use with 12 Point nuts
Jabiru Engine Part

People who bought this item also bought:

1. 12 Point Nut 3/8 - 24 Modified (Ref: PH4A055N-MOD)

2. Barrel Stud Short (Ref: 4292044)

3. O Ring Cylinder Base (Ref: PG0025N)

Barrel Stud Short

Ref: 4292044

Quantity:

Price: £15.27 (£18.32 Including VAT at 20%)

Latest design for use with 12 Point nuts
Jabiru Engine Part

People who bought this item also bought:

1. Barrel Stud Long (Ref: 4291044)

2. 12 Point Nut 3/8 - 24 Modified (Ref: PH4A055N-MOD)

3. Stud Front Crankcase (Ref: 4293044)

Stud Front Crankcase

Ref: 4293044

Quantity:

Price: £12.52 (£15.02 Including VAT at 20%)

Jabiru Engine Part

People who bought this item also bought:

1. 12 Point Nut 3/8 - 24 Modified (Ref: PH4A055N-MOD)

2. Barrel Stud Short (Ref: 4292044)

3. Barrel Stud Long (Ref: 4291044)

Dist Drive Gear

Ref: 4333054

Quantity:

Price: £32.40 (£38.88 Including VAT at 20%)

Jabiru Engine Part

Crankcase Dowel Steel Pin (use p/n 4A603AOD)

Ref: 4347054

Quantity:

Jabiru Engine Part

Prop Flange J2200 - 20mm Offset - 125mm Diameter

Ref: 4525064

Quantity:

Optional propeller flange for the J2200 engine with the following specification:-

Offset - 20mm
Diam - 125mm
Prop PCD A - 100.00
Prop PCD B - 101.60

Use P/N 466218N

Ref: 4610074

Quantity:

Camshft 3.3L s/n 01-1683

Ref: 4625072

Quantity:

Price: £611.01 (£733.21 Including VAT at 20%)

Available to order

Gear Housing Rear

Ref: 4631073

Quantity:

Price: £138.98 (£166.78 Including VAT at 20%)

Jabiru Engine Part

Gear Crankshaft 5/16 Holes

Ref: 4643084-9

Quantity:

No longer available

Please Use 4A521AOD and PG4A037N

Crankshaft J2200 5/16 (s/n 437+)

Ref: 4644082

Quantity:

Price: £1,566.93 (£1,880.32 Including VAT at 20%)

Please consult an authorised Jabiru engineer before installing this item.

Skycraft offer a bottom end rebuild service where owners are welcome to bring their stripped and cleaned engine to Skycraft's bespoke Jabiru engine workshop and use the ultrasound cleaner for final cleansing before assisting with dimensional checking and reassembly of the bottom end of their engine.

Skycraft will sign off the worksheets leaving the owner to complete the rest of his re-assembly at home.

Skycraft make a £150 charge for this service plus the cost of any spares used from our extensive stocks.

Fly Spacer & V/ Pump Drive up to s/n 2731

Ref: 4646084

Quantity:

Price: £28.66 (£34.39 Including VAT at 20%)

Jabiru Engine Part

Steel Conrod Assy 2200 & 3300 (Special Order Only)

Ref: 4651084

Quantity:

Available To Order

Prop Flange J2200 / J3300 - 20mm Optional

Ref: 4662084

Quantity:

Price: £144.06 (£172.87 Including VAT at 20%)

Optional propeller flange for the J2200 / J3300 engine with the following specification:-

Offset - 20mm
Diam - 140mm
Prop PCD A - 101.60
Prop PCD B - 111.12

People who bought this item also bought:

1. 1/4 x 1 1/4 UNC Socket Head Cap Screw (Ref: PH15434)

2. Bellville Washer 1/4 (Ref: PH10724)

3. Belleville Washer 3/8 (Ref: PH10224-2)

Prop Flange 2200/3300 Engine - Standard Supplied

Ref: 466218N

Quantity:

Price: £220.70 (£264.84 Including VAT at 20%)

Standard propeller flange for the J2200 / J3300 engine with the following specification:-

Offset - 70mm
Diam - 140mm
Prop PCD A - 101.60
Prop PCD B - 111.12

Flange Prop Mount 3" Extension 88 2200/3300 Eng

Ref: 466228N

Quantity:

Price: £271.81 (£326.17 Including VAT at 20%)

Optional propeller flange for the J2200 / J3300 engine with the following specification:-

Offset - 95mm
Diam - 140mm
Prop PCD A - 101.60
Prop PCD B - 111.12

Prop Face Plate 3300

Ref: 4687084

Quantity:

Price: £30.24 (£36.29 Including VAT at 20%)

Jabiru Engine Part

People who bought this item also bought:

1. WASHER (PKT 25) (Ref: AN960-416L)

2. WASHER (PKT 25) (Ref: AN960-416)

3. BOLT 1/4D. 3-5/16G. 3-25/32L. (Ref: AN4-36A)

Prop Guide 3.3 SS

Ref: 4689084

Quantity:

Price: £12.03 (£14.44 Including VAT at 20%)

Jabiru Engine Part

Camshaft 2.2L s/n 01 - 2849

Ref: 4738092

Quantity:

Price: £533.54 (£640.25 Including VAT at 20%)

Please consult an authorised Jabiru engineer before installing this item.

Skycraft offer a bottom end rebuild service where owners are welcome to bring their stripped and cleaned engine to Skycraft's bespoke Jabiru engine workshop and use the ultrasound cleaner for final cleansing before assisting with dimensional checking and reassembly of the bottom end of their engine.

Skycraft will sign off the worksheets leaving the owner to complete the rest of his re-assembly at home.

Skycraft make a £150 charge for this service plus the cost of any spares used from our extensive stocks.

Sump (For Bolt On Induction)

Ref: 4791402

Quantity:

Price: £295.00 (£354.00 Including VAT at 20%)

This sump has been previously fitted to an engine but never run. As new but technically secondhand.
Jabiru Engine Part

Hydraulic Lifter Modified

Ref: 4A211AOD

Quantity:

Price: £21.09 (£25.31 Including VAT at 20%)

Jabiru Engine Part

Crank Gear (thick walled)

Ref: 4A521AOD

Quantity:

Price: £215.74 (£258.89 Including VAT at 20%)

New thick walled crank gear. Must be fitted with seal p/n PG4A037N
Jabiru Engine Part

Dowel C/Case (7/16) Nil Dot 12.512/12.501 Dia

Ref: 4A603AOD

Quantity:

Price: £4.58 (£5.50 Including VAT at 20%)

Jabiru Engine Part

Dowel C/Case (7/16) One Dot 12.523/12.512 Dia

Ref: 4A603BON

Quantity:

Price: £4.58 (£5.50 Including VAT at 20%)

Jabiru Engine Part

Dowel C/Case (7/16) Two Dot 12.534/12.523 Dia

Ref: 4A603CON

Quantity:

Price: £4.58 (£5.50 Including VAT at 20%)

Jabiru Engine Part

Dowel C/Case (7/16) Three Dot 12.545/12.534 Dia

Ref: 4A603DON

Quantity:

Price: £4.58 (£5.50 Including VAT at 20%)

Jabiru Engine Part

Prop Flange 20mm (X-Air)

Ref: A486AOD-1

Quantity:

Price: £147.93 (£177.52 Including VAT at 20%)

This prop flange is specifically made to fit a J2200 engine for the X-Air Hawk

2200 Con Rod Bearing Shell (single set 8)

Ref: PB0055N

Quantity:

Price: £79.53 (£95.44 Including VAT at 20%)

Bearing Set Main 3300 (Set of 16)

Ref: PB0080N

Quantity:

Price: £223.33 (£268.00 Including VAT at 20%)

Please consult an authorised Jabiru engineer before installing this item.

Skycraft offer a bottom end rebuild service where owners are welcome to bring their stripped and cleaned engine to Skycraft's bespoke Jabiru engine workshop and use the ultrasound cleaner for final cleansing before assisting with dimensional checking and reassembly of the bottom end of their engine.

Skycraft will sign off the worksheets leaving the owner to complete the rest of his re-assembly at home.

Skycraft make a £150 charge for this service plus the cost of any spares used from our extensive stocks.

Conrod Bearing Set 3300

Ref: PB0090N

Quantity:

Price: £119.28 (£143.14 Including VAT at 20%)

Thrust Bearing Set

Ref: PB9942N

Quantity:

Price: £34.58 (£41.50 Including VAT at 20%)

Please consult an authorised Jabiru engineer before installing this item.

Skycraft offer a bottom end rebuild service where owners are welcome to bring their stripped and cleaned engine to Skycraft's bespoke Jabiru engine workshop and use the ultrasound cleaner for final cleansing before assisting with dimensional checking and reassembly of the bottom end of their engine.

Skycraft will sign off the worksheets leaving the owner to complete the rest of his re-assembly at home.

Skycraft make a £150 charge for this service plus the cost of any spares used from our extensive stocks.

Dowel Pin Flywheel 6 x 24mm

Ref: PE4A007N

Quantity:

Price: £1.57 (£1.88 Including VAT at 20%)

Pin Dowel Std 6mm x 20mm (from s/n 2732)

Ref: PE4A008N

Quantity:

Price: £1.78 (£2.14 Including VAT at 20%)

Hydraulic Valve Lifter High Leakage

Ref: PE4A019N

Quantity:

See part number 4A211AOD

2200 Main Bearing Shell (Set of 12)

Ref: PG0095N

Quantity:

Price: £174.14 (£208.97 Including VAT at 20%)

Please consult an authorised Jabiru engineer before installing this item.

Skycraft offer a bottom end rebuild service where owners are welcome to bring their stripped and cleaned engine to Skycraft's bespoke Jabiru engine workshop and use the ultrasound cleaner for final cleansing before assisting with dimensional checking and reassembly of the bottom end of their engine.

Skycraft will sign off the worksheets leaving the owner to complete the rest of his re-assembly at home.

Skycraft make a £150 charge for this service plus the cost of any spares used from our extensive stocks.

Valve Lifter Solid

Ref: PG92324

Quantity:

Price: £20.74 (£24.89 Including VAT at 20%)

Please consult an authorised Jabiru engineer before installing this item.

Skycraft offer a bottom end rebuild service where owners are welcome to bring their stripped and cleaned engine to Skycraft's bespoke Jabiru engine workshop and use the ultrasound cleaner for final cleansing before assisting with dimensional checking and reassembly of the bottom end of their engine.

Skycraft will sign off the worksheets leaving the owner to complete the rest of his re-assembly at home.

Skycraft make a £150 charge for this service plus the cost of any spares used from our extensive stocks.

Propeller Ext 2 inch - 5100

Ref: 487611N

Quantity:

Price: £233.72 (£280.46 Including VAT at 20%)

Dowel Pin 8mm x 24mm

Ref: PH4A058N

Quantity:

Price: £1.99 (£2.39 Including VAT at 20%)

Plate Prop Mount 2200/3300

Ref: 4A542AOD

Quantity:

Price: £30.05 (£36.06 Including VAT at 20%)