Online Catalogue | Jabiru | Jabiru Airframe Spares | Jabiru Instruments, Senders & Cockpit Electrics
Ref: CHTSENDER
Quantity:
This is the standard sender used with the VDO cylinder head temperature gauge on all Jabiru engines.This sender is supplied with a 12mm ring as standard, which is correct for the Jabiru spark plug.This sender with other ring end terminal sizes can be supplied by special request.Some aircraft have been found to be incorrectly wired, if you find a CHT sender not working, reverse the polarity on either the back of the gauge or the sender socket. Don't alter the sender plug as that is correct.The cold junction of the CHT sender should be stable at around 22 deg C, so for every degree higher at the cold junction the gauge will display 1 degree lower and vice versa. People who bought this item also bought:
Ref: CHTSENDERSM
This is the latest design sender used with the VDO cylinder head temperature gauge on all late Jabiru cylinder heads with the hole in the land between the spark plugs as shown HEREThis sender is supplied with a 4mm ring as standard, mounting bolt and shake proof washer.Heads without this sender fitted will require the hole tapping to 8-32 UNC, taps are available in our Jabiru Tools section.This sender with other ring end terminal sizes can be supplied by special request.Some aircraft have been found to be incorrectly wired, if you find a CHT sender not working, reverse the polarity on either the back of the gauge or the sender socket. Don't alter the sender plug as that is correct.The cold junction of the CHT sender should be stable at around 22 deg C, so for every degree higher at the cold junction the gauge will display 1 degree lower and vice versa. People who bought this item also bought:
Ref: PI10325N
25mm - 44mm pipe sizeAvailable to order
Ref: 1048094
Jabiru Airframe Part
Ref: 1048204
Ref: 203913N
Available To Order From Jabiru PTY People who bought this item also bought:
Ref: 4389054
Jabiru Engine Part People who bought this item also bought:
Ref: CIRCUITBREAKER-10
People who bought this item also bought:
Ref: CIRCUITBREAKER-5
Ref: FLAPSWITCH
Ref: FUSE10A
Ref: FUSE30A
Ref: PI0306N
Ref: PI10172N
Plese order part numer 323-057
Ref: PI10182N
Single pole oil pressure sender for the Jabiru 2200 & 3300 engines. People who bought this item also bought:
Ref: PI10316N
SPST People who bought this item also bought:
Ref: PI10692N
Ref: PI11763N
Ref: PI12497N
Ref: PITOTTUBEPROT
Ref: PTTSWITCH
Ref: RINGTERMINAL
Fits under Jabiru D9EA Spark Plugs People who bought this item also bought:
Ref: STRDBL01K
As fitted to factory built Jabiru's