Online Catalogue | Materials | Other Hardware | Tinnerman
Ref: A8944-632-493
Quantity:
Cage type. Permit mounting of aircraft instruments from the front of the panel. No charge in panel or instrument design required. Non-magnetic (speed nut is brass; cage is phosphor bronze). Conform to MIL-N-3336. Cage is easily compressed with finger-pressure to allow insertion of legs into clearance holes. When fully inserted and pressure is released, legs spring apart; retain SPEED NUT in screw-receiving position. Turned-down corners hold firm against force of inserting screw and screw-tightening torque. All instrument mounting nuts listed below take a 6-32 machine screw.
Ref: A1691-8Z-1
Ref: A6195-8Z-1
Riveted or welded in position. Attach access plates, doors or any part that must be fastened securely, yet easily removed with fasteners retained in a blind location. Install with AN426AD-3 rivets.
Ref: WA8
Use with 100° flat head screws to provide reinforced, low-profile attachments. People who bought this item also bought:
Ref: WA10
Ref: WA6
Ref: A1776-4Z-1
Used to replace threaded nuts, lock washers, and spanner washers; weigh less than other types of self-locking aircraft fasteners. Can be applied faster, easier, and are vibration resistant. Provide maximum holding power at minimum cost per fastener. Turned-up ends prevent scoring of surfaces. Use with type B tapping screws.
Ref: A1779-10Z-1
Ref: A1777-6Z-1
Ref: A1778-8Z-1
Ref: A1322-632-1
Ref: A1181-62-1
Ref: S2436-1
Ref: A6187-4Z-3
Ref: LHA4972-1032
Ref: A1787-10Z-1
Ref: A6187-4Z-1
Ref: A1784-6Z-1
Ref: A3236-012-936
Ref: A3236-028-935
Ref: A3235-028-935
Ref: A1789-8Z-1D